Legacy Venado Botas Altas De Montar Con Cordones

How to measure for this product:

Leg (A + B):
Leg measurement: Please sit barefoot and upright on a chair so that your foot rests flat on the floor, with your knee bent at a 90° angle. Wear the breeches and riding socks you normally use for riding. Ideally, have another person take the measurements for you. Measure your calf at the widest point of your stronger calf. When choosing the calf size from the chart, select at least one centimeter smaller, as leather will stretch with use. Then measure the length from your heel (barefoot) to the back of your knee. Add approximately 2 cm to the measured length, as the shaft will drop a few centimeters with wear. Example: If you measure a calf width of 35 cm at the widest point and a calf height of 46 cm, this means: width 35 - 1 cm = 34 cm and height 46 + 2 cm = 48 cm. The correct size in the chart would therefore be 34/48. The shaft should fit snugly and be slightly taller in height. The leather will stretch at least 1 cm in width, and the shaft will drop several centimeters in height. We therefore recommend using a heel lift during the first few weeks. Not all boots and chaps are measured in the same way, so please refer to the notes in the respective size charts.

Foot (C):
Foot measurement: Please measure both feet, as the measurements are often not identical. To do this, stand barefoot on a sheet of paper with your heel against a wall, making sure the paper also touches the wall. Then trace the outline of both feet (see image). Now measure from the longest toe to the heel (end of the paper). Add 1 cm /10 mm to the measurement of the longer foot. This result is the so-called inner shoe length. For example, if your longer foot measures 22.8 centimeters (228 millimeters), you calculate 22.8 + 1.0 for an inner shoe length of 23.8 centimeters. In the table, look in the column “Foot + 1 cm = up to” for the corresponding measurement and find the correct shoe size in the same row. Important: If you are unsure which size to choose, always select the next larger size. UK measurements are rounded to the nearest size.

How to measure for this product:

Leg (A + B):
Leg measurement: Please sit barefoot and upright on a chair so that your foot rests flat on the floor, with your knee bent at a 90° angle. Wear the breeches and riding socks you normally use for riding. Ideally, have another person take the measurements for you. Measure your calf at the widest point of your stronger calf. When choosing the calf size from the chart, select at least one centimeter smaller, as leather will stretch with use. Then measure the length from your heel (barefoot) to the back of your knee. Add approximately 2 cm to the measured length, as the shaft will drop a few centimeters with wear. Example: If you measure a calf width of 35 cm at the widest point and a calf height of 46 cm, this means: width 35 - 1 cm = 34 cm and height 46 + 2 cm = 48 cm. The correct size in the chart would therefore be 34/48. The shaft should fit snugly and be slightly taller in height. The leather will stretch at least 1 cm in width, and the shaft will drop several centimeters in height. We therefore recommend using a heel lift during the first few weeks. Not all boots and chaps are measured in the same way, so please refer to the notes in the respective size charts.

Foot (C):
Foot measurement: Please measure both feet, as the measurements are often not identical. To do this, stand barefoot on a sheet of paper with your heel against a wall, making sure the paper also touches the wall. Then trace the outline of both feet (see image). Now measure from the longest toe to the heel (end of the paper). Add 1 cm /10 mm to the measurement of the longer foot. This result is the so-called inner shoe length. For example, if your longer foot measures 22.8 centimeters (228 millimeters), you calculate 22.8 + 1.0 for an inner shoe length of 23.8 centimeters. In the table, look in the column “Foot + 1 cm = up to” for the corresponding measurement and find the correct shoe size in the same row. Important: If you are unsure which size to choose, always select the next larger size. UK measurements are rounded to the nearest size.

How to measure for this product:

Leg (A + B):
Leg measurement: Please sit barefoot and upright on a chair so that your foot rests flat on the floor, with your knee bent at a 90° angle. Wear the breeches and riding socks you normally use for riding. Ideally, have another person take the measurements for you. Measure your calf at the widest point of your stronger calf. When choosing the calf size from the chart, select at least one centimeter smaller, as leather will stretch with use. Then measure the length from your heel (barefoot) to the back of your knee. Add approximately 2 cm to the measured length, as the shaft will drop a few centimeters with wear. Example: If you measure a calf width of 35 cm at the widest point and a calf height of 46 cm, this means: width 35 - 1 cm = 34 cm and height 46 + 2 cm = 48 cm. The correct size in the chart would therefore be 34/48. The shaft should fit snugly and be slightly taller in height. The leather will stretch at least 1 cm in width, and the shaft will drop several centimeters in height. We therefore recommend using a heel lift during the first few weeks. Not all boots and chaps are measured in the same way, so please refer to the notes in the respective size charts.

Foot (C):
Foot measurement: Please measure both feet, as the measurements are often not identical. To do this, stand barefoot on a sheet of paper with your heel against a wall, making sure the paper also touches the wall. Then trace the outline of both feet (see image). Now measure from the longest toe to the heel (end of the paper). Add 1 cm /10 mm to the measurement of the longer foot. This result is the so-called inner shoe length. For example, if your longer foot measures 22.8 centimeters (228 millimeters), you calculate 22.8 + 1.0 for an inner shoe length of 23.8 centimeters. In the table, look in the column “Foot + 1 cm = up to” for the corresponding measurement and find the correct shoe size in the same row. Important: If you are unsure which size to choose, always select the next larger size. UK measurements are rounded to the nearest size.

How to measure for this product:

Leg (A + B):
Leg measurement: Please sit barefoot and upright on a chair so that your foot rests flat on the floor, with your knee bent at a 90° angle. Wear the breeches and riding socks you normally use for riding. Ideally, have another person take the measurements for you. Measure your calf at the widest point of your stronger calf. When choosing the calf size from the chart, select at least one centimeter smaller, as leather will stretch with use. Then measure the length from your heel (barefoot) to the back of your knee. Add approximately 2 cm to the measured length, as the shaft will drop a few centimeters with wear. Example: If you measure a calf width of 35 cm at the widest point and a calf height of 46 cm, this means: width 35 - 1 cm = 34 cm and height 46 + 2 cm = 48 cm. The correct size in the chart would therefore be 34/48. The shaft should fit snugly and be slightly taller in height. The leather will stretch at least 1 cm in width, and the shaft will drop several centimeters in height. We therefore recommend using a heel lift during the first few weeks. Not all boots and chaps are measured in the same way, so please refer to the notes in the respective size charts.

Foot (C):
Foot measurement: Please measure both feet, as the measurements are often not identical. To do this, stand barefoot on a sheet of paper with your heel against a wall, making sure the paper also touches the wall. Then trace the outline of both feet (see image). Now measure from the longest toe to the heel (end of the paper). Add 1 cm /10 mm to the measurement of the longer foot. This result is the so-called inner shoe length. For example, if your longer foot measures 22.8 centimeters (228 millimeters), you calculate 22.8 + 1.0 for an inner shoe length of 23.8 centimeters. In the table, look in the column “Foot + 1 cm = up to” for the corresponding measurement and find the correct shoe size in the same row. Important: If you are unsure which size to choose, always select the next larger size. UK measurements are rounded to the nearest size.